Sod Calculator

Calculate rolls and whole pallets of sod from the lawn area and the coverage your supplier specifies. Add a cutting allowance suited to the shape of the lawn.

Metric unit converter

Convert your measurements into the units shown on the calculator, or convert a result to metric.

Project measurements

Material estimate

Lawn area
120 ft²
Rolls to buy
13
Whole pallets if sold by pallet
1

How the estimate works

  1. Find the net lawn area

    Multiply length by width for a rectangular lawn. For an irregular layout, sketch the footprint and divide it into rectangles, triangles, and other shapes that are easy to measure. Subtract areas covered by walkways, patios, or planting beds. Measure to the intended edge of the grass instead of using lot dimensions. If you know the final square footage, use an equivalent rectangle such as 10 × 40 ft for a 400 ft² lawn.

  2. Calculate the extra cutting area

    Multiply the measured area by one plus the extra percentage as a decimal. A 5% allowance on 400 ft² adds 20 ft². Cutting allowance provides room to trim around boundaries. It does not change the area of lawn you actually intend to cover. An uncomplicated rectangular patch usually needs fewer unusable cutoffs than a narrow winding strip of equal square footage.

  3. Divide by supplier coverage per roll

    Enter the coverage in square feet from the supplier. If the supplier lists roll dimensions in inches, multiply length × width and divide by 144 to convert square inches to square feet. Divide adjusted area by the coverage per roll and round up. Use the actual roll size for the products in your quote because dimensions and packaging can vary.

  4. Convert the purchase to pallet quantities

    Divide whole rolls by rolls per pallet and round up if you must buy full pallets. If the seller offers partial pallets or individual rolls, use the roll count for a closer order. Check the delivery description: some sellers quote only square footage per pallet. In that case, compare the adjusted total directly with labeled coverage to confirm that the packaging assumption is correct.

Worked example

A 12 ft by 10 ft lawn has 120 ft². With 5% added for cuts, plan for 126 ft². At 10 ft² per roll, that is 12.6 rolls, so purchase 13. If one full pallet contains 50 rolls, the full-pallet estimate is one pallet. That pallet would cover 500 ft². If your supplier offers individual rolls, ordering 13 rolls instead buys 130 ft² and avoids the surplus from whole-pallet packaging.

Length (ft)
12
Width (ft)
10
Coverage per roll (ft²)
10
Rolls per pallet
50
Extra sod (%)
5

Reference table

Example project with one input varied; other settings stay as shown above
Roll coverage (ft²)Rolls to buyWhole pallets if sold by pallet
5261
8161
10131
12111

Common mistakes

How much extra should I buy?

For a clean rectangle, 5% is a reasonable starting allowance for trimming. Consider roughly 10% for curved boundaries, multiple planting islands, or many small strips. Check how cuts can be reused in other parts of the lawn. A higher allowance can be less useful than accurate net-area measurements or a simple layout sketch showing where straight rolls will meet curved edges.

Before you order

Draw the grass boundary and annotate the measurements along permanent edges. Separate irregular corners from the larger rectangular sections so the margin for cuts is based on the shape, not just the total square footage. If two sections are the same product and will be laid at the same time, combine the adjusted square footage before rounding to rolls. For a narrow area where repeated slices cannot be reused, estimate the cut pattern explicitly.

Ask your supplier whether the order is quoted by piece, square foot, or full pallet. Keep both the coverage per piece and the number of pieces per pallet in your notes. A quoted 500 ft² pallet could contain fifty 10 ft² rolls, but other roll formats can give the same coverage with a different piece count. This matters for handling and verifying that the delivered volume of work matches the estimate.

Make a separate takeoff for soil or gravel used in adjacent work. Their quantities depend on thickness and are sold by volume or weight. The sod order uses surface coverage only. Confirm what sections must be ready to receive delivery and which portions may be ordered for a later visit. Dividing the work into multiple orders can change the number of full rolls or pallets required after rounding.

Sources and assumptions

  • Roll area and rolls per pallet are editable examples. The calculation uses net surface area plus the selected cutting allowance.
  • Check the supplier’s coverage and whether individual rolls or partial pallets are available.

Choose the lawn product for local conditions

Warm-season and cool-season grass options vary by region and site. Ask a local supplier or extension office which varieties fit your climate, sun exposure and use. Use the roll coverage for the product you actually select, since packaging may change with the supplier.

Finish ground preparation before scheduling delivery

Measure the final lawn boundary after planning beds and hardscape. Confirm grading, soil preparation and delivery timing with the supplier. Fresh sod is perishable, so align delivery with when the ground is ready and follow local advice for installation conditions.

Another project to check

A side lawn measures 34 × 17 ft. Compare a supplier’s 8 ft² rolls, 60 rolls per pallet, and an 8% cutting allowance for curved boundaries.

Lawn area
578 ft²
Rolls to buy
79
Whole pallets if sold by pallet
2

Frequently asked questions

How much sod comes on a pallet?

It varies by product and supplier. Multiply labeled square feet per roll by the number of rolls per pallet, or use the quoted pallet coverage.

How many rolls cover 500 square feet?

At 10 ft² per roll, 50 rolls cover 500 ft² before allowance. At 5% extra, round up to 53 rolls.

Do I round to a full pallet?

Round to full pallets only if required by your supplier. If individual rolls are available, the whole-roll quantity is the smaller purchase.

Can I enter the area of multiple lawn sections?

Yes. Combine areas for sections using the same product or estimate them separately if they need different roll coverage, timing, or cut allowances.

Does the sod estimate include soil or fertilizer?

No. The calculation covers sod surface area only. Estimate any added topsoil separately by area and depth.

How can I account for an island in the lawn?

Subtract the island’s area from the lawn and increase the cutting allowance if its edges require more trimming.

This is a material estimate. Verify measurements, product coverage, and applicable local requirements before buying or building.

Related calculators