Topsoil Calculator

Estimate how many cubic yards or bags of topsoil to order for a lawn, bed, or bare patch. Use the planned added depth rather than the total depth of soil already present.

Metric unit converter

Convert your measurements into the units shown on the calculator, or convert a result to metric.

Project measurements

Material estimate

Coverage area
120 ft²
Topsoil to buy
1.63 yd³
Topsoil bags
30

How the estimate works

  1. Measure the area receiving new soil

    Multiply rectangular length and width in feet to get square feet. For an irregular space, sketch its boundary and divide it into areas you can measure, such as rectangles and triangles. Omit paving, stone, beds, or other sections that will not receive the same topsoil. If you only know the total area, use a matching rectangle. For instance, dimensions of 10 × 25 ft represent 250 ft².

  2. Measure added depth where the grade varies

    Enter the depth you plan to add, in inches. For leveling work, take multiple measurements and identify separate high and low areas. A uniform four-inch layer over an entire lawn is a different order from small patches of deeper fill. If measurements change substantially, divide the yard into areas and assign a practical average depth within each area. Keep the soil estimate separate from planting depth or grading decisions.

  3. Calculate volume in cubic feet

    Divide added depth by 12 to convert inches to feet. Multiply the result by square footage. For separate areas, combine the cubic-foot totals for areas using the same soil. Multiply by one plus the allowance to account for variations and handling. Physical settling depends on the soil and how it is placed. Confirm whether your supplier’s quantity is a loose delivery volume and how it compares to the finished layer you want.

  4. Convert to bulk yards or bags

    Divide cubic feet by 27 to get cubic yards. If buying bags, divide the adjusted cubic feet by cubic feet per bag and round up. Give the supplier the unrounded quantity if bulk orders are sold in increments. You can then distinguish the material allowance you entered from the extra volume caused by rounding the delivery size.

Worked example

Consider a 12 ft by 10 ft area with 4 in of added topsoil. That is 120 ft² × (4 ÷ 12) = 40 ft³ before allowance. With 10% extra, plan for 44 ft³. In bulk, 44 ÷ 27 is about 1.630 yd³. For 1.5 ft³ bags, 44 ÷ 1.5 is about 29.33, so buy 30 bags. Those bags deliver 45 ft³, one cubic foot beyond the adjusted estimate.

Length (ft)
12
Width (ft)
10
Topsoil depth to add (in)
4
Volume per bag (ft³)
1.5
Extra material (%)
10

Reference table

Example project with one input varied; other settings stay as shown above
Added depth (in)Topsoil to buyTopsoil bags
10.407 yd³8
20.815 yd³15
41.63 yd³30
62.444 yd³44

Common mistakes

How much extra should I buy?

Start with 5–10% for measured areas that have modest variation. If a site has deep depressions or blended transitions, estimate those areas separately rather than trying to cover everything with a larger percentage. A product’s moisture and handling can affect how a loose delivery spreads or settles. Ask how the seller measures loads, especially if compacted or settled depth is a critical part of the plan.

Before you order

Write down which areas need the same material before combining quantities. Turf preparation, planting beds, and small depth corrections can use different products. This volume estimate does not choose a soil blend. Ask the supplier about screening and material specifications for your use. If you are comparing two blends sold in different units, keep their quoted cubic-foot equivalents and package sizes next to one another.

Draw a depth map for any project that involves bringing an uneven surface to grade. Mark a set of representative measurements instead of taking the deepest point as the average. For a transition from 1 in to 3 in across a small, evenly sloped rectangle, a 2 in average can be a reasonable approximation. If the deeper area is concentrated in a small depression, treat that patch separately. More meaningful measurements usually improve the order more than a larger blanket allowance.

Plan how the material will reach each work area and whether the delivery can be divided. Keep a measured subtotal per section so you can allocate the quantity when spreading. If purchasing bags, decide whether unused bags can be shared among areas before rounding the individual estimates. Round the final total using the same method you used for the other materials on the project.

Sources and assumptions

  • Bulk volume comes from measured area and added thickness. The 1.5 ft³ bag is an editable example.
  • Use the label volume and ask about the relationship between loose delivered volume and the finished layer.

Distinguish fill from a planting layer

A deep grade correction and the planting layer above it can use different materials. Estimate both volumes separately and ask the supplier which product meets the project specifications. Enter only the topsoil layer’s added thickness in this tool.

Account for settling without guessing a density

Compaction and settlement affect the depth a loose delivery will produce. Ask the supplier for the conversion that suits the soil and moisture condition. For uneven grades, estimate localized areas by their measured depths. An allowance can cover small variation but cannot replace a takeoff of large low areas.

Another project to check

A 25 × 8 ft strip needs a 2½ in planting layer. Use the 1.5 ft³ bag for comparison and add 7% extra.

Coverage area
200 ft²
Topsoil to buy
1.651 yd³
Topsoil bags
30

Frequently asked questions

How much area does a cubic yard of topsoil cover?

A cubic yard covers 108 ft² at 3 in or 81 ft² at 4 in, before allowance.

How many 1.5 cubic foot bags make a cubic yard?

Exactly 18 bags at 1.5 ft³ per bag make 27 ft³, which is one cubic yard.

Can I estimate topsoil for an irregular lawn?

Yes. Measure the area in smaller sections. Combine volume estimates for sections using the same material.

How much does a cubic yard of topsoil weigh?

It depends on the soil and moisture content. Request the supplier’s bulk density or delivered weight for the product.

Can I buy topsoil by weight instead of cubic yards?

Yes, if your supplier sells it that way. Ask for the weight-to-volume conversion for the actual soil and moisture condition.

This is a material estimate. Verify measurements, product coverage, and applicable local requirements before buying or building.

Related calculators