How the estimate works
Measure the surface area
For a rectangular area, multiply length × width in feet. A winding path can be broken into shorter sections with comparable widths. Estimate each section separately if width or depth changes substantially. Combine only like materials: decorative gravel and compacted base can have different sizes, densities, and installed thicknesses.
Convert depth and calculate volume
Divide depth in inches by 12 then multiply by area for cubic feet. Apply your allowance, then divide by 27 for cubic yards. Specify whether the dimensions describe the loose layer as delivered or the compacted layer needed in place. If your project specifies a compacted depth and the seller quotes loose volume, ask for the appropriate conversion.
Use bulk density to get weight
Multiply cubic feet by pounds per cubic foot, then divide by 2,000 to get US short tons. Bulk density includes the spaces between pieces and is not the density of solid rock. Particle size, moisture, and compaction affect the figure. Read the supplier’s specification or ask for a yard-to-ton conversion for the exact product.
Match the estimate to the way the supplier sells
If your seller quotes by cubic yard, the weight can help plan several pickup loads, but actual load limits and material weight must be checked separately. When the seller quotes by ton, request the weight increment. A cubic yard is a volume, not a fixed weight. Round at the ordering step based on the package, scale, or delivery increment.
Worked example
A 12 ft by 10 ft rectangle covered to 3 in takes 30 ft³ before allowance. With 10% extra, plan for 33 ft³ or about 1.222 yd³. At an assumed bulk density of 100 lb/ft³, that volume weighs 3,300 lb, divided by 2,000 for 1.65 US short tons. If the density is 120 lb/ft³ instead, the same order volume weighs 3,960 lb or 1.98 short tons.
- Length (ft)
- 12
- Width (ft)
- 10
- Gravel depth (in)
- 3
- Bulk density (lb/ft³)
- 100
- Extra material (%)
- 10
Reference table
| Bulk density (lb/ft³) | Gravel volume | Gravel weight |
|---|---|---|
| 80 | 1.222 yd³ | 1.32 US tons |
| 95 | 1.222 yd³ | 1.568 US tons |
| 100 | 1.222 yd³ | 1.65 US tons |
| 120 | 1.222 yd³ | 1.98 US tons |
Common mistakes
- Assuming a universal ton per yard. Loose pea gravel and compacted crushed aggregate can have different bulk densities. Enter the value for your purchase.
- Using metric tonnes as US tons. A US short ton is 2,000 lb. A metric tonne is 1,000 kg, so the numbers differ for the same weight.
- Estimating depth from the existing layer. For a top-up, measure how much material you actually need to add. The total desired layer thickness can overstate the order if gravel is already in place.
How much extra should I buy?
For a level bed or path with clear boundaries, start with about 5–10% extra for small depth variations and spreading losses. If the ground has ruts or depressions, measure them before adding a higher percentage. Compaction is a separate conversion: ask the supplier how a delivered loose quantity translates to your specified finished layer. A supplier’s minimum load can exceed the calculated allowance.
Before you order
Prepare a separate line for each material. A driveway base and a decorative top layer can cover the same area but have different depths, densities, and supplier units. Specify which layer requires compaction and which material you plan to spread loose. If a supplier gives pounds per cubic yard, divide by 27 for pounds per cubic foot before entering the density. If it gives short tons per cubic yard, multiply by 2,000 and divide by 27. For example, 1.5 short tons per yd³ is about 111.11 lb/ft³.
If some areas need more material than others, divide the job at the depth changes. A path that is 4 ft wide throughout can still need two estimates if the first section is shallow and the second crosses a depression. Put each section’s depth in inches and combine the volume by product. If you buy by weight, use a density for the same material at the same order condition. Do not combine unlike products by averaging their densities without accounting for how much of each is required.
Tell the supplier whether your order is based on weight or volume. If the quote uses a conversion factor, write that factor on your takeoff so you can reconcile the delivery ticket with your estimate later.
For a paver project, use the patio calculator for pavers, joint sand, and edges. For a poured surface over the base, measure the pour separately with the concrete slab estimator. For a straight wall project, calculate retaining wall blocks and caps separately.
Sources and assumptions
- The default 100 lb/ft³ is an example input, rather than a measured density for a particular stone. The conversion uses 2,000 lb per US short ton.
- Ask your supplier for bulk density and whether it refers to loose or compacted stone at typical delivery moisture.
Pea gravel and angular crushed stone
A decorative path and a compacted foundation may use different stone. Rounded pea gravel and angular crushed aggregate have different particle shapes and packing behavior. Product size alone does not establish bulk density. Use the supplier’s weight-per-yard factor for the exact product, or ask for its bulk density in pounds per cubic foot.
Separate driveway base from surface gravel
Use separate takeoffs when a base and finish layer use different aggregates. Identify the depth condition for each: an installed compacted base, for example, is different from the delivered loose load. Water and fines can change weight at the same volume, so ask whether a density applies to delivery or to dry material.
Another project to check
A 32 × 3 ft garden path gets 2½ in of stone. The supplier’s example density is 110 lb/ft³. Set the allowance to 5% and compare the volume and purchase weight.
- Gravel volume
- 0.778 yd³
- Gravel weight
- 1.155 US tons
Frequently asked questions
How much does a cubic yard of gravel weigh?
Multiply the bulk density in lb/ft³ by 27. At 100 lb/ft³, one cubic yard weighs 2,700 lb or 1.35 US short tons.
How much area does one yard cover at 3 inches?
One cubic yard covers 108 ft² at 3 in deep before an allowance, because 27 ÷ 0.25 = 108.
Can I estimate crushed stone and pea gravel here?
Yes, if you use each product’s bulk density and the correct layer depth. The default density is only an example.
Should I use compacted or loose depth?
Use the planned installed depth, and check the seller’s conversion when purchasing loose material to build a compacted layer.
How do I convert the supplier’s tons per yard to lb/ft³?
Multiply short tons per cubic yard by 2,000 and divide by 27. Enter that result into the bulk density field.
Can I use one estimate for base and decorative stone?
Estimate the layers separately when depth or density differs. Add purchase quantities only if they are for the same product and order unit.
This is a material estimate. Verify measurements, product coverage, and applicable local requirements before buying or building.