Concrete Bag Calculator

Compare the number of 40, 60, and 80 lb concrete bags for the same pour. Enter a volume in cubic yards, cubic feet, or cubic meters and use the yields on the bags you plan to buy.

Metric unit converter

Convert your measurements into the units shown on the calculator, or convert a result to metric.

Project measurements

Material estimate

Concrete to buy
27 ft³
Bulk equivalent
1 yd³
40 lb bags
90
60 lb bags
60
80 lb bags
45

How the estimate works

  1. Find the actual pour volume

    Start from a measured or calculated volume. For a rectangular footing or slab, area times thickness gives volume once all dimensions use the same unit. For a cylindrical hole, use the radius to find the cross-sectional area before multiplying by depth. If a post or other solid object occupies part of the space, subtract the relevant displacement. Add unrounded volumes from all parts you will pour together before transferring the total here.

  2. Select the unit shown on your takeoff

    A cubic yard contains 27 cubic feet because one yard is three feet in each of three dimensions. A cubic meter is about 35.315 cubic feet. The calculator normalizes your input to cubic feet. If your takeoff says 0.5 yd³, that means 13.5 ft³, not 0.5 ft³. If you obtained a quote in cubic yards but your plans give liters, convert to cubic meters by dividing liters by 1,000 or use the converter above.

  3. Enter the published yield for each bag

    A 60 lb label tells you the dry package weight. Yield tells you how much mixed concrete that bag produces. Different mixes can have different yields at the same weight. The examples use 0.30, 0.45, and 0.60 ft³ for 40, 60, and 80 lb bags, respectively. These are example values from the QUIKRETE Concrete Mix technical sheet. Consult the data sheet or label for each product you are comparing.

  4. Add extra and round to whole packages

    Multiply the volume by one plus the percentage entered as a decimal. Divide this target by each bag’s yield and round each result up. The three counts are independent alternatives. Buying every count in the table would order the same pour multiple times. If combining package sizes, multiply each chosen count by its yield and check that the sum covers the target volume.

Worked example

One cubic yard equals 27 ft³. With a zero allowance, divide 27 by 0.30, 0.45, and 0.60 to get 90, 60, and 45 bags, respectively. All three results cover the same volume in this example. If you add 10%, the target becomes 29.7 ft³. At those same yields, the choices are 99 bags at 40 lb, 66 bags at 60 lb, or 50 bags at 80 lb. The last count rounds up from 49.5, so those bags yield 30 ft³.

Concrete volume
1
Volume unit
Cubic yards (yd³)
Yield per 40 lb bag (ft³)
0.3
Yield per 60 lb bag (ft³)
0.45
Yield per 80 lb bag (ft³)
0.6
Extra concrete (%)
0

Reference table

Example project with one input varied; other settings stay as shown above
Concrete volume (yd³)40 lb bags60 lb bags80 lb bags
0.25231512
0.5453023
0.75684534
1906045
1.51359068

Common mistakes

How much extra should I buy?

For measured forms, starting with 5–10% extra is a way to account for handling and small depth differences. Use your actual measurements for larger cavities or thicker edges. If your input already includes an allowance, leave this tool’s allowance at zero to avoid double counting. For very small jobs, the next whole bag can provide considerably more than the percentage you intended.

Before you order

Compare the three options using the labor and handling capacity you actually have. The total dry weight for the one-yard example is 3,600 lb for any of the three exact combinations, but handling ninety 40 lb bags is different from handling forty-five 80 lb bags. Check vehicle payload and practical access before treating a bag count as a single load. Ask the seller what a pallet contains, whether partial pallets are available, and whether its quantities are quoted in pieces or by volume.

If the job includes separate pours, make a small schedule with the unrounded volume and planned product for each batch. A combined total works when mixing and placement let you share material. Otherwise each pour may need its own whole-bag amount. For larger orders, give a ready-mix supplier your cubic-yard requirement and ask about delivery minimums or increments. The calculator reports volume; pump access, timing and mixture specifications are separate purchasing questions.

Sources and assumptions

  • The example yields of 0.30, 0.45 and 0.60 ft³ come from the QUIKRETE Concrete Mix technical sheet. Each size is an alternative for the entire pour.
  • Replace the example yield with the label for your particular product and confirm the seller’s package size.

Hand mixing versus a mixer

Compare the number and weight of bags with the people, equipment, and access available. For a small isolated task, hand mixing may suit the product instructions. For several successive batches, compare mixer capacity or ready-mix delivery with your order volume. Check the manufacturer’s mixing method and capacity limits.

Allow for working time between batches

Mixture, temperature and job conditions affect working time. Look up the product’s stated time and confirm how you will place it before ordering. Keep separate quantities for batches that cannot share wet leftovers, and round once for each group of bags you can actually use together.

Another project to check

A small repair takeoff gives 7.5 ft³. Compare three label yields with 5% added. Each bag count is an alternative for the entire mix volume.

Concrete to buy
7.875 ft³
Bulk equivalent
0.292 yd³
40 lb bags
27
60 lb bags
18
80 lb bags
14

Frequently asked questions

How many 80 lb concrete bags are in a cubic yard?

At 0.60 ft³ per bag, one cubic yard takes 45 bags before allowance. The result changes if your product lists a different yield.

How many 60 lb bags are in a cubic yard?

At 0.45 ft³ per bag, 60 bags yield 27 ft³, or one cubic yard.

How do I compare bags with ready-mix?

Use the same target volume and allowance in both comparisons. Use the whole-package bag quantity and ask the ready-mix supplier how it rounds bulk orders.

Should I add the counts for different bag sizes?

No. Each count represents an alternative way to cover the entire target using that bag size.

Can I mix 40 lb and 80 lb bags in one order?

You can compare the combined yield by multiplying each chosen bag count by its label yield and adding those volumes. Check product instructions before mixing different formulations.

This is a material estimate. Verify measurements, product coverage, and applicable local requirements before buying or building.

Related calculators