How the estimate works
Measure the footprint
Multiply the finished length and width in feet to find square feet. For an L-shaped footprint, divide it into rectangles that share an edge without overlapping. Calculate the area for each rectangle and add the pieces when buying loose material. For edging, walk the actual outside boundary. Shared edges from the rectangles are internal and do not get edging.
Find effective paver coverage
Use the length and width covered by a paver in its installed pattern, including its share of the joint. Convert the patio area to square inches by multiplying by 144, then divide by effective paver area. Add the allowance and round up. When a product is sold as a multi-size pattern kit, use the labeled square footage per kit rather than the area of a single piece.
Estimate the base and bedding layers
For each layer, divide depth in inches by 12 and multiply by square feet to get cubic feet. Divide by 27 to get cubic yards. The base input is compacted depth, so the number describes the in-place layer plus the allowance. Talk to the seller about how much loose material produces that compacted volume. Bedding sand is a separate layer and should have its own depth.
Use package coverage for joints and measure the edges
Divide patio square footage by joint sand coverage per bag and round up. Joint width, depth, paver shape, and product formulation affect coverage. Use the product’s value for your layout. Edging is twice the length plus twice the width, less the length where no edging is required. Round to whole sticks or packages according to your supplier’s lengths.
Worked example
A 12 ft by 10 ft patio covers 120 ft². An 8 in by 4 in effective paver covers 32 in², so 120 × 144 ÷ 32 = 540 pieces before cuts. Add 10% for 594 pavers. A 4 in base is 40 ft³ before allowance, or about 1.630 yd³ with 10% extra. A 1 in bedding layer is 10 ft³ before allowance, or 0.407 yd³ with extra. At 40 ft² per joint sand bag, buy three. With all sides exposed, edging is 44 ft before extra.
- Length (ft)
- 12
- Width (ft)
- 10
- Effective paver length (in)
- 8
- Effective paver width (in)
- 4
- Compacted base depth (in)
- 4
- Bedding sand depth (in)
- 1
- Joint sand coverage per bag (ft²)
- 40
- Perimeter without edging (ft)
- 0
- Extra material (%)
- 10
Reference table
| Compacted base depth (in) | Compacted base with allowance | Pavers to buy |
|---|---|---|
| 3 | 1.222 yd³ | 594 |
| 4 | 1.63 yd³ | 594 |
| 5 | 2.037 yd³ | 594 |
| 6 | 2.444 yd³ | 594 |
Common mistakes
- Using a loose yard as a compacted yard. The base settles during installation. Ask for the product-specific conversion before ordering loose stone.
- Buying joint sand by the bedding volume. The two products serve different spaces. Bedding covers the entire footprint; joint sand fills the spaces between units.
- Applying the same cut allowance to every pattern. Diagonal layouts and many boundaries generate different cuts from a straight rectangular layout. Review the cut pattern before buying.
How much extra should I buy?
A straight pattern on a rectangle can often start with 5–10% extra pavers, while diagonal cuts or complicated edges may need 10–15%. Treat those as planning ranges. Base and bedding may merit 5–10% beyond calculated in-place volume for minor variation, separately from loose-to-compacted conversion. Joint sand and edging do not get the percentage in this tool. Adjust those quantities based on coverage and your cut list.
Before you order
Bring both a footprint sketch and a layer schedule when requesting quantities. Label the planned finish height and whether base depths refer to compacted material. Note if one part of the patio uses thicker base or a different paver pattern. A single averaged depth can obscure differences between sections, and mixed patterns may come in fixed proportions. Give suppliers the installed square footage and relevant measurements rather than relying only on a piece count.
Check packaging before treating the result as an order. If units arrive in layers or full pallets, calculate the number of packages from the supplier’s labeled coverage, then check how many spare pieces you will receive. Ask whether matching pieces are available separately for future repairs. For sand, confirm expected coverage at the designed joint width and depth. For edging, note how many runs terminate at stairs or a wall, then plan cuts and connections from stock lengths. These details can change the shopping list even when the patio area is unchanged.
If your base supplier sells by weight, use the gravel calculator for cubic yards and US tons. For a poured surface instead of modular pavers, compare the concrete slab volume and bag estimate.
Sources and assumptions
- Installed unit coverage comes from the paver dimensions you enter. Layer volumes use your entered compacted base and bedding depths.
- Confirm joint-sand coverage on the label and ask the aggregate supplier how loose delivery volume converts to compacted volume.
Pattern and border can change the cut list
Straight running bond, basket patterns and herringbone can use the same footprint but different edge cuts or unit proportions. If the pattern uses more than one size, check coverage per pattern kit. Measure a contrasting border separately so its pieces do not also get counted as field pavers.
Match base, bedding and joint sand to their roles
Enter the compacted base depth specified for the use and site. A pedestrian patio and a vehicle area may require different designs. Bedding sand is a full-width layer; joint sand depends on joint geometry and product coverage. Ask the supplier for compaction and bag coverage assumptions before ordering.
Another project to check
An 18 × 9 ft patio has one 9 ft side with no edging. Enter 6 × 9 in effective paver coverage, a 5 in compacted base, and 32 ft² joint-sand coverage per bag.
- Pavers to buy
- 467
- Compacted base with allowance
- 2.7 yd³
- Bedding sand with allowance
- 0.54 yd³
- Joint sand bags
- 6
- Edging before allowance
- 45 ft
Frequently asked questions
How many pavers do I need for a 10 by 12 patio?
The example uses 540 pieces at 8 by 4 in effective coverage or 594 pieces with a 10% allowance. Other unit sizes or patterns change the number.
Should I include the joint in paver dimensions?
Use the installed coverage per piece, which can include its share of the joint. If the manufacturer gives coverage per pallet or kit, use that figure to check your estimate.
Is the base volume loose or compacted?
The base depth is compacted. Ask your supplier how much loose material will compact to the calculated volume.
Why is edging in linear feet?
Edging follows the exposed boundary. Its quantity depends on perimeter and openings, not the patio’s surface area.
This is a material estimate. Verify measurements, product coverage, and applicable local requirements before buying or building.